YJ-IP3000 Injection / Syringe Pump

Introduction:

Using new technology of microcomputer, compact structure and convenient operation,
YJ-IP3000 syringe have multi-warning functions and could use various injectors.
HSP-3 syringe pump is suitable for generic medicament and unsuitable for
stupefacient, anodyne,, chemotherapy medicine, etc.
Specifications:
Temperature:-5ºC~+40ºC Relative humidity:≤80%RH
Power supply:AC220V±22V,50HZ±1HZ
Built-in battery:12V±1.5V,the battery can be used for 2 hours when fully charged.
Atmospheric pressure:860hPa~1060hPa
Storage condition:temperature -40ºC~55ºC Size (mm):320(L)x145(w)x120(H)
Weight:about 3KG Consume power:≤10VA
Frequency:50HZ±1HZ
Usable injector (one-off) size:10ml, 20ml, 30ml, 50ml
Flow rate option:0.1ml/h~199.9ml/h, minimum step 0.1ml/h
Transfusion amount setting:0.1ml~999.9ml,minimum step 0.1ml
Block pressure:40~70kPa
Flow rate error:±5%(0.1ml/h≤Flow≤50ml/h)
±3%(50ml/h≤Flow≤199.9ml/h)
Alarm:self-test, occlusion, near-end, completion, underpowered battery
Function: injector type test, transfusion amount indication, power indication,
alarmvolume option, auto-alarm, KVO function
YJ-IP3000 Syringe Pump's Advantages:
1. Our syringe pump could use all brands through calibration (default setting is
Terumo), syringes including 10ml, 20ml, 30ml, 50ml.
2. Auto-recognize the syringe size: 10, 20, 30, 50ml.
3. Available for adjust alarm volume (3 levels), standby alarm delay time (1-9min),
nearly finish alarm interval (0-3min).
4. Power Switching Function: When AC power is disconnected, automatically switch
into battery power supply and give indication. When the AC power is connected,
automatically switch into AC power working.
5. Repeat Alarm Function: If the alarm real reason is not be resolved within 2 minutes
after press "SILENCE" button, it will give alarm again to remind to resolve the problem.
6. Battery Protection Alarm: For protect battery and safety infusion, the battery power
will be displayed as different levels in sound and light from nearly finish to exhausted.
7. Double confirmation function when flow rate≥300ml/h, make safer and avoid
misoperation.
8 The data can be cleared, make safer.
9. Lock the control panel during infusion, make safer.
10 For avoid misoperation, press "POWER" for 3 seconds to close the pump.
11. Able to set flow rate by single digit, tens digit and hundreds digit separately, not
need to increase from single digit.
12. KVO (Keep Vein Open) function. After finish setting infusion amount, for prevent
to form thrombus, keep to infusion at the lowest rate 0.1ml/h.
13. Bolus (Quick Infuse) function.
14. Purge (Evacuate Bubble) function.
15. Press "mL", real-time display infused volume.
16. The bright & large LED screen could be clear seen far from 10 meters.
17. The battery can be used continuously for 5 hours after full charged.
18. Equip with special adjustable-pitch fixed bracket. It could adjust the pump on 45ºC
angle or other angle for easy watching.
19. The chip in syringe pump is be processed by ourselves on SMT machine production
line instead of by manual work, as weld every point by hand.
20. CPU control, stable function, high reliability.